How to Sew the Soft V Neck on the Laminaria Swimsuit

The soft V neck on the Laminaria Swimsuit is really easy to sew and gives you results that are almost as nice as the sharp V neck, so if you’re not looking to give yourself an extra challenge, this is the way to go. Cut your elastic to the length described in the instructions. Mark the center of the elastic with a pen. You can go ahead and write with a ball-point pen or permanent marker (instead of a wash-away marker) since it won’t be seen in the finished suit. Pin the elastic to the inside of the suit. I like to use pins horizontally so I can take them out as I sew. The elastic is the same length as the fabric here so no need to stretch or gather anything. Make sure that your center mark aligns with the center of the V. The exact position of the …

How to Sew Narrow Swimsuit Straps

There’s something ever so satisfying about a crisp little spaghetti strap. Did you know that narrow swimsuit straps are actually really easy to sew? It’s true! Both 1/4″ and 3/8″ spaghetti straps for swimsuits are deceptively easy because we can sew them around the right size elastic for crisp perfection! Start by cutting a strip of your swimsuit fabric that is 1.5″ wide (works for either 1/4″ or 3/8″ elastic. You can use the same technique for wider elastic to make wider straps though you will need wider fabric strips to start). You can sew a single strap that is twice the length of your finished strap and cut it in half when you are done. Align your elastic to one long edge of your strap on the wrong side of the fabric. You can pin it in place before sewing if you prefer or just feed it carefully as …

2

How to Sew the Laminaria Swimsuit with a Mesh Insert

When I was designing the Laminaria Swimsuit I intentionally placed the contrast insets such that they could be sewn in mesh without the swimsuit becoming scandalous. The easiest way to do so is to use mesh for the inserts in View A and use a mesh or skin color lining. However if you take the easy approach your seam allowances may be visible at the edges of your mesh. If you want to guarantee that the mesh looks as clean as possible there are a few changes that you need to make to cutting and construction. They’re not technically challenging but they do require understanding the suit construction so I’d strongly recommend sewing the suit with a standard inset following the normal directions once before attempting mesh. Start by cutting View A out of your fabric using mesh for the inserts. Instead of a full lining, you will cut the lining out of …

How to Sew the Sharp V Neck on the Laminaria Swimsuit

The sharp V neck on the Laminaria swimsuit is a bit tricky to sew. I recommend trying it at least once on a scrap of fabric before you do it on your actual swimsuit. If you find this too hard or don’t want to bother you can always sew the soft V neck instead! So why are we even doing all these weird fussy steps? It effectively adds a seam allowance to the center front V so that you can sew elastic to the edge and turn it to the inside without stretching the center front. The first step is to stabilize the center of the V. If you already basted the body to the lining along the center front that should be enough. If you haven’t, sew for a few inches on either side of the center V 1/4″ from the edge using a straight stitch and pivoting at the …

How to Attach the Laminaria Swimsuit Straps

The Laminaria Swimsuit really can be sewn by a confident beginner sewist. I have a selection of photo and video tutorials to give an added boost of confidence. Today, I’ll show you all the steps involved in attaching the straps to the front and back of the suit. I’m showing the steps out of order but clustered by back and front strap attachment so that you can understand the process to the finished swimsuit which should hopefully make the steps intuitive when you reach them in the instructions. Remember, there are 3 options for how you attach your straps. If you want them to go straight in the back or cross in the back, start by attaching the straps to the back of the suit. If you want halter ties, skip over the back attachment steps and only attach them at the front. BACK: In steps 36/37 we pin and baste the …

Shortening/Lengthening the Laminaria Swimsuit

One of the coolest things about sewing your own swimsuit is that you can make the torso the right length. As a tall gal, 1 piece swimsuits have always been my nemesis as there’s nothing worse than rocking a wedgie every time you put on your swimsuit. The Laminaria swimsuit has printed shorten/lengthen lines on the pattern pieces to make shortening and lengthening easy. How can you tell if you need to add/remove length from your swimsuit? The size chart tells you the crotch length that the pattern is designed for which is average for an average height woman (5’6″). If you need more/less length in ready-two-wear swimsuits, you’ll probably want more/less in this swimsuit. However, the only way to tell for sure is to make a muslin out of the same fabric that you will be using for your final suit as small differences in horizontal and especially vertical stretch …

Laminaria Swimsuit Pattern Testers

The most satisfying and inspiring part of any pattern release is seeing it made up by other women! It is so fun to see a collection of different women using different fabric and making different design decisions, all from the same pattern. I was fortunate to have an amazing, inspiring, creative assortment of women that tested the Laminaria Swimsuit and I’m honored to share some of their gorgeous creations and their thoughts on the pattern! (Because this pattern is a swimsuit there were quite a number of women that asked not to be included in this post – they know who they are and I am just as thankful to them for their help!) One thing to note – you may notice that the larger sizes show off more cleavage than the smaller sizes regardless of cup size. The final pattern was regraded across the top range of sizes to fix …

2

Introducing the Laminaria Swimsuit!

Introducing…the Laminaria Swimsuit! It’s a one piece swimsuit with a sinuous inset panel that wraps around the body like its namesake kelp. The pattern is fully lined and comes with 2 different cup size options (A-C cup or D-F cup) to make fitting a breeze. View A has decorative inset panels while View B is plain. Either can be sewed with a sharp V neck or an easier to sew rounded V neckline. Instructions are included for optional cup insertion. The straps can be tied around the neck halter style or can be attached to the back either straight down or crossed across the back. And in further exciting news, the pdf pattern is a layered pattern AND it’s also available in print! Buy the Pattern Now Laminaria is the scientific name for kelp (referring to the order Laminariales, family Laminariaciae, or genus Laminaria). When developing the swimsuit, I pictured …